EPEVER 100A MPPT Solar Charge Controller 12/24/36/48VDC Automatically Identifying System Voltage with MT52 Remote Meter & Temperature Sensor RTS & Communication Cable RS485

Tracer AN series controller, based on multiphase synchronousrectification technology (MSRT) and advanced MPPT control algorithm,with dual-core processor architecture and common negative design, hasthe features of high response speed, high reliability, and highindustrial standard. MSRT can very high conversion efficiency in anycharge power, which sharply improves the energy efficiency of solarsystem; Advanced MPPT control algorithm minimize the maximum power pointloss rate and loss time, to ensure the tracking efficiency,corresponding speed as well as high conversion efficiency under high orlow power, so that in any situation, Tracer AN products can rapidlytrack the maximum power point(MPP) of PV array to obtain the maximumenergy of the panel. The limitation function of the charging power andcurrent, and automatic power reduction function fully ensure thestability when works with oversize PV modules and operate under hightemperature environment.

Rated charge current: 100A

Battery voltage range: 8V~64V

MPPT Technology High Tracking Efficiency > 99%

Battery temperature compensation function

Monitor and set the parameters via mobile phone APP or PC software

Compatible with lead-acid and lithium-ion batteries

Compatible with lead-acid and lithium-ion batteries

• Whilewiring the controller do not close the circuit breaker of fuse and makesure that the leads of "+" and "-" poles are connected correctly.
• Afuse which current is 1.25 to 2 times the rated current of thecontroller, must be installed on the battery side with a distance fromthe battery not greater than 150 mm.
• Ifthe controller is to be used in an area with frequent lightning strikesor unattended area, it must be installed an external surge arrester.
• Ifan inverter is to be connected to the system, connect the inverterdirectly to the battery, not to the load side of the controller.
• Package List:
• 1 x Solar Charge Controller
• 1 x User Manual
• 1 x MT52
• 1 x RTS
• 1 x RS485

You can directly contact SolaMr to select for you.



The control you will purchase must meet two conditions

1. The rated current of the controller must be greater than (the power of the solar panel divided by the voltage of the battery)

2. The open circuit voltage of the controller must be greater than the open circuit voltage of your solar panel, and both must be greater than the voltage of your battery

MPPT Solar Charge Controller:

How to choose a solar controller with the appropriate specifications?