Solar Pump Controller, LCB 10A with IP68,Linear Current Boosters Used in Solar Direct Pumping Applications;Compatible Models: 12V or 24 VDC Pumps; Input Voltage: 16 - 50 DC; Potting epoxy Resin Black
Versatile Compatibility: Compatible with both 12V and 24V systems for flexible installation and operation
-
Detail
1.The solar water pump system is mainly used for gardens, pastures, farms, mines, and household water. It is a solar water pump system that does not require batteries.The system includes solar panel; LCB(Solar pump controller); water pump,;switch float and tank;
2.Solar direct – the power of the sun, without maintaining a battery bank. The most efficient way to use a solar pump is solar-direct, powering the pump directly off the solar panel, without using batteries. Rather than experiencing losses through storing power in batteries, the water itself is stored to be used when needed. It’s much easier to store water than power.
Always Yellow Wire connect to the float switch wire, The other float switch wire connect to the negative PV, the negative PV connected to be grounded. If there is no float switch, please ignore the yellow wire connection .
When the controller output power is low ,Please consider to add lengthen the pipe of the pump until the input power and output power are close.
ModelLCB10A12V/24V IP68 Rated system voltage12V/ 24VMax load current11AMaximum output voltage12 V(12V System) 24V(24V System)Short circuit/Over currentShort circuit/Over currentStart up Input-voltage14V/28VEfficiency>98%Max. Panel voltage50VDimensions (WxHxD)106mm*56.6mm*20mmWire Length/size140mm/2.5m²Ambient temperature-40°C-+60°CIP gradeIP68Net weight200gMIN Input Voltage12V/24VMAX Power240W(24V systems)120W (12V systems)Solar Water Pump System
Solar Water Pump System Connection Diagram
Solar Water Pump System Connection Diagram
LCB10A12V/24V IP68Technical Characteristics
-
Customer ReviewsNo comments