Home / Wind Turbine Generator Kit, 12/24V 400W Vertical Wind Power Turbine Generator, 3 Blades Portable Helix Wind Turbine Generator 1.3m/s Starting Wind Speed for Marine RV Home Industrial Energy

Wind Turbine Generator Kit, 12/24V 400W Vertical Wind Power Turbine Generator, 3 Blades Portable Helix Wind Turbine Generator 1.3m/s Starting Wind Speed for Marine RV Home Industrial Energy

【Strong Durability】Wind turbines with coreless permanent magnet generators and three high-strength FRP blades are more durable and have a long service life. The main rod is made of high-hardness aluminum, which can be fully recycled, not easy to break, and environmentally friendly.
【Smooth Operat
Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Specification:

    Controller System: Electromagnetism

    Starting Wind Speed: 1.3m(12inch)/s

    Cut-in Wind Speed: 2.5m(98inch)/s

    Rated Wind Speed: 11m(433inch)/s

    Max Instantaneous Wind Speed: ≤40m(1575inch)/s

    The Instantaneous Maximum Wind Speed: ≤45m(1772inch)/s

    Blades Quantity: 3 (with Different Colors)

    Diameter of Blades: 0.6m/24inch

    Blades Height: 0.8m/31inch

    Speed Regulation: Automatic

    Rated Voltage: 12V/24V

    Rated Power: 400W

    Max Power: 450W

    Generator Protection Grade: IP67

    Work Environment Temperature: 25 to 45℃+

    Product Assembly Weight: <10kg/22lbs

    Over-speed Protection: Electromagnetic Brake

    Blade Material: Glass Fiber

    Generator: Maglev Generator

    Service Life: 10-15 Years

    Installation Instructions: Not Included

    Installation

    1. Check all the parts of the wind turbine, which includes 6 brackets and 3 blades in total.

    2. Place the wind turbine vertically.

    3. Connect brackets with blades by the bolt. Load the upper cover plate and lower cover plate.

    4. Fix the bolt in the mounting hole (at the end of the bracket) from the outside of the wind blade.

    5. Tighten all the bolts of blades and brackets, and toggle the blades. It should not have abnormal noise or jamming. Tighten the nut (under the upper cover plate of the wind turbine) to make the upper cover plate tightly fixed.

    6. Align the flange hole of the wind turbine with the flange hole on the tower pole, put on flat washers and spring washers, and tighten the nut.

  • Customer Reviews
    No comments