Wind Turbine, 600W Wind Generator Kit with 8 Blades, Wind Generator Kit with Charge Controller, Wind Power Generator for Marine, DC 12V Turbine Wind Generator, Hybrid Wind Turbine Generator
-
Detail
Specifications:
Installation Method: Vertical Type
Wind Direction Adjustment: Automatically Adjust the Windward Angle
Generator Type: 3-Phase AC Permanent Magnet Generator
Braking Method: Electromagnetic
Anemometer Battery: One 3V Lithium Battery(Included)
Number of Blades: 8
Voltage: 12V
Rated Power: 600W
Max. Power: 650W
Start-up Wind Speed: 3m/s
Rated Wind Speed: 13m/s
Safe Wind Speed: 50m/s
Max. Wind Speed: 60m/s
Working Temperature: -40 ~ 80 ℃/-40-176℉
Noise: 40db
Blade Length(Each): 40cm/15.7inch
Blade Diameter(Wheel Included): 92cm/36.22inch
Tower Tube Diameter: 42-45mm/1.65-1.77inch(Not Included)
Package Size: 72*28*23cm/30.7*11.02*9.05inch
Gross Weight: 8.2kg/18.07lbs
How to Install:
1.Take out the wind turbine, put it on the tower, and align it with the flange holes. Install four flat washers on the four bolts, and then insert the bolts into the corresponding holes of the flange. Tighten the screws with an Allen key.
2.The three wires of the wind turbine are connected with the transmission cable, each pair of wires is not less than 30mm, and the adhesive tape at the connection end is 100mm.
3.Connect the wind turbine cable to the controller. The battery must be connected to the controller before wiring.
Package Included:
1* Wind Turbine
8* Blades
1* Wind Wheel
1* Controller
1* Anemometer
1* Flange Plate
1* English Manual
Other Accessories for Assembly.
Notes:
1.This package does not include a tower tube, and we recommend using a steel pipe or iron pipe of 1.65-1.77" in diameter.
-
Customer ReviewsNo comments