Wind Turbine Generator Kit 600W 12V with 8 Blade, Wind Power Generator with Charge Controller Wind Controller Turbine Generator Kit for Boats, Cabins or Home

Specifications:

Material: Nylon Fiber, Die-casting Aluminum Alloy, Neodymium Iron Boron

Process: Plastic Spraying, Die-casting

Shape: Fan-shape, Round

Installation Method: Vertical Type

Wind Direction Adjustment: Automatically Adjust the Windward Angle

Generator Type: 3-Phase AC Permanent Magnet Generator

Braking Method: Electromagnetic

Anemometer y: One 3V Lithium y(Included)

Number of Blades: 8

Voltage: 12V

Rated Power: 600W

Max. Power: 650W

Start-up Wind Speed: 3m/s

Rated Wind Speed: 13m/s

Safe Wind Speed: 50m/s

Max. Wind Speed: 60m/s

Working Temperature: -40 ~ 80 ℃/-40-176℉

Noise: 40db

Blade Length(Each): 40cm/15.7inch

Blade Diameter(Wheel Included): 92cm/36.22inch

Tower Tube Diameter: 42-45mm/1.65-1.77inch(Not Included)

Package Size: 72*28*23cm/30.7*11.02*9.05inch

Gross Weight: 8.2kg/18.07lbs

How to Install:

1.Take out the wind turbine, put it on the tower, and align it with the flange holes. Install four flat washers on the four bolts, and then insert the bolts into the corresponding holes of the flange. Tighten the screws with an Allen key.

2.The three wires of the wind turbine are connected with the transmission cable, each pair of wires is not less than 30mm, and the adhesive tape at the connection end is 100mm.

3.Connect the wind turbine cable to the controller. The y must be connected to the controller before wiring.

Package Included:

1* Wind Turbine

8* Blades

1* Wind Wheel

1* Controller

1* Anemometer

1* Flange Plate

1* English Manual

Notes:

This package does not include a tower tube, and we recommend using a steel pipe or iron pipe of 1.65-1.77" in diameter.