CHRISK Wind Turbine 10000W 5 Blade Wind Vertical Generator 3 Phase AC Permanent Magnet Generator Wind Turbine Kit with Controller
[5 Nylon Fiber Blades]- Wind turbine blades adopt reinforced nylon fibers which are stronger and have strong anti-wind ability. Particularly,
-
Detail
➤Specifications:
Name:Wind Turbine
Maximum power:10000W
Number of blades:5
Rated voltage:12V/24V/48V/220V(Optional)
Start-up wind speed:2m/s
Rated wind speed :12m/s
Safe wind speed: 45m/s
Blade Material: Nylon Fiber
Braking Method: Electromagnetic
Wind power and type: three-phase AC permanent magnet synchronous generator
Wind direction adjustment: automatic adjustment of the wind
Operating Temperature: -40 ~ 80 ℃
➤Package Content:
Wind Turbine x 1
Blades x 5
Controller x 1
Set Screws and Nuts x 1
Installation Notes x 1
Note:Without tower tube
(We recommend:steel pipes or iron pipes, diameter :50±2mm)
➤Easy installation:
1.Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key.
2.The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.
3.Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring. -
Customer ReviewsNo comments