Home / Wind Turbine Generator, 400W 24V Vertical Axis Wind Power Turbine Generator Controller, Spiral Wind Generator Kit w/3 Blades for Home, Boat, Home Windmill Kit, Low Noise

Wind Turbine Generator, 400W 24V Vertical Axis Wind Power Turbine Generator Controller, Spiral Wind Generator Kit w/3 Blades for Home, Boat, Home Windmill Kit, Low Noise

🌬️【Excellent Performance】The wind turbine generator kit features a coreless permanent magnet generator and three high-strength nylon fiber blade materials, making it wear-resistant and durable. Horizontal rotation brings less wind pressure and strong wind resistance to withstand super typhoons.
🌬
Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Specification:

    Condition: New

    Controller System: Electromagnetism

    Starting Wind Speed: 2.0-2.5m/s

    Cut-in Wind Speed: 2.5m(98inch)/s

    Rated Wind Speed: 14m/s

    The Instantaneous Maximum Wind Speed: ≤45m(1772inch)/s

    Blades Quantity: 3 (with Different Colors)

    Diameter of Blades: 0.6m/24inch

    Blades Height: 0.8m/31inch

    Speed Regulation: Automatic

    Rated Power: 400W

    Max Power: 450W

    Generator Protection Grade: IP67

    Work Environment Temperature: 25 to 45℃+

    Product Assembly Weight: <10kg/22lbs

    Over-speed Protection: Electromagnetic Brake

    Blade Material: Nylon Fiber

    Generator: Maglev Generator

    Service Life: 10-15 Years

    Installation Instructions: Not Included

    Rated Voltage: 24V


    Installation

    1. Check all the parts of the wind turbine, which includes 6 brackets and 3 blades in total.

    2. Place the wind turbine vertically.

    3. Connect brackets with blades by the bolt. Load the upper cover plate and lower cover plate.

    4. Fix the bolt in the mounting hole (at the end of the bracket) from the outside of the wind blade.

    5. Tighten all the bolts of blades and brackets, and toggle the blades. It should not have abnormal noise or jamming. Tighten the nut (under the upper cover plate of the wind turbine) to make the upper cover plate tightly fixed.

    6. Align the flange hole of the wind turbine with the flange hole on the tower pole, put on flat washers and spring washers, and tighten the nut.

    7. Professional installation is highly recommended if you have no previous installation experience.

  • Customer Reviews
    No comments