12000W Vertical Wind Power Turbine Generator,12V/24V/48V 3-Phase Vertical Wind Generator Wind Turbine Wind Turbine Controller Windmill
● Generator: rotor adopts NdFeB permanent magnet material, stator adopts red copper winding, high temperature resistance, good conductivity and high efficiency.
-
Detail
1. Check all the parts of the wind turbine, which includes 5 blades in total.
2. Place the wind turbine vertically.
3. Connect brackets with blades by the bolt. Load the upper cover plate and lower cover plate.
4. Fix the bolt in the mounting hole (at the end of the bracket) from the outside of the wind blade.
5. Tighten all the bolts of blades and brackets, and toggle the blades. It should not have abnormal noise or jamming. Tighten the nut (under the upper cover plate of the wind turbine) to make the upper cover plate tightly fixed.
6. Align the flange hole of the wind turbine with the flange hole on the tower pole, put on flat washers and spring washers, and tighten the nut.
7. Professional installation is highly recommended if you have no previous installation experience.
8. You can watch the attached installation video as a reference.
9. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.
Package Included
1 x Wind Turbine
1 x Controller
5 x Blades
1 x Bag of Screws to Connect the Main Body
1 x Bag of Screws for Connecting the Bracket Blades
Other Accessory for Assembly -
Customer ReviewsNo comments