Wind Turbine Generator Kit 450W 12V Portable Vertical Helix Wind Power Turbine Generator Kit for Hybrid Solar Wind System

Specification

Condition: New

Controller System: Electromagnetism

Starting Wind Speed: 1.3m(12inch)/s

Cut-in Wind Speed: 2.5m(98inch)/s

Rated Wind Speed: 11m(433inch)/s

Max Instantaneous Wind Speed: ≤40m(1575inch)/s

The Instantaneous Maximum Wind Speed: ≤45m(1772inch)/s

Blades Quantity: 3 (with Different Colors)

Diameter of Blades: 0.6m/24inch

Blades Height: 0.8m/31inch

Speed Regulation: Automatic

Rated Voltage: 12V

Rated Power: 400W

Max Power: 450W

Generator Protection Grade: IP67

Work Environment Temperature: 25 to 45℃+

Product Assembly Weight: <10kg/22lbs

Over-speed Protection: Electromagnetic Brake

Blade Material: Glass Fiber

Generator: Maglev Generator

Service Life: 10-15 Years

Installation Instructions: Not Included

Details

Vertical Blades: The main force point of the wind turbine is concentrated on the blade edge, so that it can effectively avoid blade shedding, fracture, or flying out.

Three-phase AC Permanent Magnet Generator: The wind turbine with a low-torque and high-power intelligent tracking microprocessor can regulate current and voltage efficiently. It significantly increases wind energy utilization and annual power production.

Aluminum Main Rod: The main rod is made of aluminum with high hardness and can be fully recycled, so it is uneasy to break and eco-friendly.

Application

It is well suited for boats, gazebos, cabins or mobile houses, and other energy supplies for homes, businesses and industry.

Package Included

1 x Wind Turbine

1 x Controller

3 x Blades (White, Red, Blue)

1 x Bag of Screws to Connect the Main Body

1 x Bag of Screws for Connecting the Bracket Blades

Other Accessory for Assembly

Notes

1. There are two different kinds of screws. Please confirm the correct position of the screws before installation.

2. The upper cover plate of the wind turbine does not need to be tightened, and the blades can be properly adjusted upward or downward during installation.

3. When you place the wind turbine vertically, please prevent the bottom flange from crushing the output wire.

4. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.