Wind Turbine Helix Generator Kit,400W Wind Power Turbine Generator Maglev Generator Vertical Wind Generator with 3 Blade and Controller (12V Red Blue White)

Details

Vertical Blades: the Main Force Point of the Wind Turbine Is Concentrated on the Blade Edge, so That It Can Effectively Avoid Blade Shedding, Fracture, or Flying out.

Three-phase Ac Permanent Magnet Generator: the Wind Turbine with a Low-torque and High-power Intelligent Tracking Microprocessor Can Regulate Current and Voltage Efficiently. It Significantly Increases Wind Energy Utilization and Annual Power Production.

Aluminum Main Rod: the Main Rod Is Made of Aluminum with High Hardness and Can Be Fully Recycled, so It Is Uneasy to Break and Eco-friendly.

Specification

Controller System: Electromagnetism

Starting Wind Speed: 2.5m/s

Cut-in Wind Speed: 2.5m(98inch)/S

Rated Wind Speed: 18m/s

Max Instantaneous Wind Speed: ≤40m(1575inch)/S

The Instantaneous Maximum Wind Speed: ≤45m(1772inch)/S

Blades Quantity: 3 (with Different Colors)

Diameter of Blades: 0.6m/24inch

Blades Height: 0.8m/31inch

Speed Regulation: Automatic

Rated Voltage: 12v

Rated Power: 400w

Max Power: 450w

Generator Protection Grade: Ip67

Work Environment Temperature: -40—+60℃

Product Assembly Weight: <10kg/22lbs

Over-speed Protection: Electromagnetic Brake

Blade Material: Glass Fiber

Generator: Maglev Generator

Service Life: 10-15 Years

Installation

1. Check All the Parts of the Wind Turbine, Which Includes 6 Brackets and 3 Blades in Total.

2. Place the Wind Turbine Vertically.

3. Connect Brackets with Blades by the Bolt. Load the Upper Cover Plate and Lower Cover Plate.

4. Fix the Bolt in the Mounting Hole (at the End of the Bracket) from the Outside of the Wind Blade.

5. Tighten All the Bolts of Blades and Brackets, and Toggle the Blades. It Should Not Have Abnormal Noise or Jamming. Tighten the Nut (Under the Upper Cover Plate of the Wind Turbine) to Make the Upper Cover Plate Tightly Fixed.

6. Align the Flange Hole of the Wind Turbine with the Flange Hole on the Tower Pole, Put on Flat Washers and Spring Washers, and Tighten the Nut.

7. Professional Installation Is Highly Recommended If You Have No Previous Installation Experience.

8.If You Have Any Problems, Please Feel Free to Contact Us. We Will Reply and Solve the Problem for You As Soon As Possible.

Package Included

1 X Wind Turbine

1 X Controller

3 X Blades (White, Red, Blue)

1 X Bag of Screws to Connect the Main Body

1 X Bag of Screws for Connecting the Bracket Blades