Home / 12000W 5 Blades Vertical Wind Turbine Kit, Wind Turbine Generator,3 Phase AC Permanent Magnet Generator, with Controller, for Hybrid Wind Solar System(Red/220V)

12000W 5 Blades Vertical Wind Turbine Kit, Wind Turbine Generator,3 Phase AC Permanent Magnet Generator, with Controller, for Hybrid Wind Solar System(Red/220V)

【5 Nylon Fiber Blades】- Wind turbine blades adopt reinforced nylon fibers which are stronger and have strong anti-wind ability. Particularly, the optimized aerodynamic shape and structural design enable high utilization of wind energy. The wind turbine can start from the breeze and adapt to the wind
Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Features:


    1.Starting with low speed; high wind energy utilization; beautiful appearance; low vibration on operation.
    2.Being installed by human design and easy for installation, maintenance and repair.
    3.This wind generator comprises a high-performance aluminum alloy body and nylon fiber blade,more Sturdy and less prone to damage.
    4.Adopting permanent magnet rotor alternator, with a special kind of stater design, efficiently decrease resistance torque of the generators.

    Specifications:

  • Name:Wind Turbine
  • Maximum power:12000W
  • Number of blades:5
  • Rated voltage:12V/24V/48V/110V/220V(Optional)
  • Start-up wind speed:2m/s
  • Rated wind speed :12m/s
  • Safe wind speed: 45m/s
  • Blade Material: Nylon Fiber
  • Braking Method: Electromagnetic
  • Wind power and type: three-phase AC permanent magnet synchronous generator
  • Wind direction adjustment: automatic adjustment of the wind
  • Operating Temperature: -40 ~ 80 ℃
  • Package Content:Wind Turbine x 1; Blades x 5; Controller x 1; Set Screws and Nuts x 1

    Installation Notes:

  • Without tower tube(We recommend:steel pipes or iron pipes, diameter :50±2mm)
  • Easy installation:


    1.Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key.
    2.The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.
    3.Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.

    Note:We are equipped with common controls. If you want to make wind-solar complementary system, you can buy wind-solar complementary controller to replace.

  • Customer Reviews
    No comments