12V 24V 48V 3 Phase AC Waterproof Wind Generator Kit 1500W with 3 Blade, Windmill Generator with Charge Controller for Street Lighting and Emergency Power Supply
★ Smooth operation: The spiral blades are designed with aerodyna
-
Detail
Welcome to the HUIZHITENGDA store to buy products
Simple installation:
Take out the wind turbine, put the wind turbine on the tower, align the flange holes. Install four flat washers on the four bolts, and then insert the bolts into the holes corresponding to the flange. Tighten the screws with a hexagonal wrench.
The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is 100 mm.
Connect the cable of the wind turbine to the controller, and the battery must be connected to the controller before wiring.
Specification:
Number of leaves: 3 leaves
Wind wheel diameter: 520mm
Blade height: 750mm
Rated voltage (AC): 12V 24V 48V
Rated power (W): 1500W
Wind installation pole size: 60mm
Packing size: 86×38×21cm
Package weight: 12kg
Initial wind speed (m/s): 2 m/s
Cut-in wind speed (m/s): 3 m/s
Rated wind speed (m/s): 10 m/s
Safe wind speed (m/s): ≤40m/s
Blade material: galvanized aluminum alloy
Generator: Three-phase permanent magnet levitation motor
Control system: electromagnet
Wind turbine installation height (m): 2-12m
Generator protection class: IP54
Working environment temperature: -25~+459C
Working environment humidity: ≤90%
Altitude: ≤4500m
Overspeed protection: electromagnetic brake
Overload protection: electromagnetic brake and unloading device
packing list:
3 × pcs blade
1 × generator
1 × bolt and nut
1 × Spindle and arm
1 × charging controller
1 × English installation manual -
Customer ReviewsNo comments