Shipenophy 200W Permanent Magnet Alternator Three Phase AC Generator Rare Earth NdFeB High Efficiency with Aluminum Alloy Shell for Wind Turbine DIY (48V)
[Low Maintenance] Designed for simplicity, this rare earth perman
-
Detail
Specification:
Item Type: Three Phase Alternator
Material: Aluminum Alloy
Gross Weight: 3950g / 139.3oz
Rated Power: 200W
Product Size: Approx.15 x 13.5 x 16.5cm / 5.9 x 5.3 x 6.5in
Rated Speed: 750 RPM
Starting Torsion:
0.1 Nm
Magnetic Poles Number: level 12
Conversion Efficiency: ≥85%
Working Temperature Rise: ≤70℃
Generator Type: Rare earth permanent magnet 3 phase alternator
Main Shaft Material: carbon steel
Magnetic Steel Material: rare earth Ndfeb material
Lubrication Mode: add lubricating grease
Insulation Class: H class
How to Use:
1.Direct connection
2.In areas with sufficient resources, small wind turbines should be used. The average annual wind speed must be greater than 3 meter per second, and the effective wind speed of 3 to 20 meter per second must accumulate more than 3000 hours every year. The average wind energy with effective density of 3 to 20 meter per second should be greater than 100W per quadratic meter.
3.It should be noted that the selection of the nominal design wind turbine is based on the local design wind speed. The use of wind resources and economics is important. The wind tunnel test shows that the power transmission of the impeller fan is directly related to the wind speed, that is, the wind speed determines the electric power output.
PackageList:
1 x 3 Phase AC Permanent Magnet Generator -
Customer ReviewsNo comments