6000W-9000W Wind MPPT Controller for Wind Turbine 12V 24V Auto 48V MPPT Wind Charge Controller for Wind Turbine Generator Water
2. Voltage/current control charging make sure storage batteries are always at the best state of charge;
3. MPPT charging effectively collect power from generator to charge storage batteries;
4. Aluminium alloy she
-
Detail
Specification:
Item Type: Wind Charge Controller
Material: Aluminum Alloy
Protection Grade: IP67
Rated wind turbine power:6000W-9000W
System Voltage: DC12V/24V/48V
Working temperature range: -35~75℃
Weight: Approx.264g
Package List:
1 x Wind Charge Controller
1 x Instruction Manual
Wiring:
1. Connect the “+” and “-” of the battery to the positive and negative terminals of the battery of the controller.
2. Connect the three-phase output voltage of the wind turbines to the three-phase voltage input terminal of the controller fan.
3. When manual brake is required, short the red thin wire to the positive battery, that is, complete the manual brake function. To cancel this function, just disconnect the thin red wire.
Indicator status:
- When the controller green power (BATTERY) indicator is on, it indicates that the battery is connected properly.
- When the controller's green fan access (WIND) indicator flashes, it indicates that the wind turbines is connected. The speed of the flashing reflects the speed of the fan.
- When the controller red (BRAKE) indicator is on, the battery is fully charged, the wind turbines is automatically braked, or the brake is automatically activated due to overcurrent protection.
-
Customer ReviewsNo comments