YES1 GA Series ATS Generator Dual Power Automatic Transfer Switch AC220V 400A 630A 4P Circuit Breaker YES1-ATS-630A-4P(630A 4P ATS)

Circuit Breakers
8.Wiring methods of the switch
8.1 The primary wiring diagram to see the picture 3.
8.2 The control power is derived from normal power,emergency power cand N phases.
8.3 and line control power AC220V connected with terminal 102~103,104~105 respectively,102 and 104 are normal power and emergency power live line respective.
8.4 Terminal 101,106 are act as signal lamp to control the power supply. Note:101 and 106 couldn't be connected with any other lines.
8.5 When above(under) input line, under(above)terminaland line A,B,C phases will be connected with copper lines or lines acting as output.
9.The instruction of debug the switch
9.1 Connect the normal power(),emergency power() to the corresponding copper bar
respectively;
Automatic debugging
Normal power supply with electric,emergency power supply with Electric,switchline switch on
Normal power supply without electric,emergency power supply with electric,switch switch on
Normal power supply with electric,switch line switch on
(Refer to the switch panel white indicating arrowhead)
Remote debugging
Press the bush button SB1,then the switchline switch on
Press bush button SB2,then the switch line switch on
Automatic/Remote(Manual)debugging
When dial the function selection switch to the automatic position: the switch should act as
the item required
When dial the function selection switch to the remote (manual) position, the switch should
act as the item required
9.2 When the switch is in the position of switch online or line,the signal lamp on the panel
should indicate correspondingly;
9.3 After finished the debugging,close the power supply firstly,and transfer the switch to the
"0"position by handle.(Middle position,refer to the switch panel white indicating
arrowhead).
==========
Hign-concerned Chemical : None
Model Number : 400A/630A
is_customized : Yes
Origin : Mainland
: ATS
Certification : certificate
pole : 4P
control voltage : AC220v default
frequency : 50HZ/60HZ
rate voltage : AC400V