Home / 400W Wind Turbine Generator Kit,12V Vertical Axis Wind Turbine Generator with 3 Blades for Home Boat Cabin Off-Grid Power

400W Wind Turbine Generator Kit,12V Vertical Axis Wind Turbine Generator with 3 Blades for Home Boat Cabin Off-Grid Power

High-efficiency vertical axis design - The vertical axis wind turbine adopts a vertical axis structure combined with three high-strength glass fiber blades. The start-up wind speed is only 1.3 meters per second. When the rated wind speed is 11 meters per second, it outputs 400W power and the maximum
Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Specification

    Condition: New

    Controller System: Electromagnetism

    Starting Wind Speed: 1.3m(12inch)/s

    Cut-in Wind Speed: 2.5m(98inch)/s

    Rated Wind Speed: 11m(433inch)/s

    Max Instantaneous Wind Speed: ≤40m(1575inch)/s

    The Instantaneous Maximum Wind Speed: ≤45m(1772inch)/s

    Blades Quantity: 3 (with Different Colors)

    Diameter of Blades: 0.6m/24inch

    Blades Height: 0.8m/31inch

    Speed Regulation: Automatic

    Rated Voltage: 12V

    Rated Power: 400W

    Max Power: 450W

    Generator Protection Grade: IP67

    Work Environment Temperature: 25 to 45℃+

    Product Assembly Weight: <10kg/22lbs

    Over-speed Protection: Electromagnetic Brake

    Blade Material: Glass Fiber

    Generator: Maglev Generator

    Service Life: 10-15 Years

    Installation Instructions: Not Included

    Installation

    1. Check all the parts of the wind turbine, which includes 6 brackets and 3 blades in total.

    2. Place the wind turbine vertically.

    3. Connect brackets with blades by the bolt. Load the upper cover plate and lower cover plate.

    4. Fix the bolt in the mounting hole (at the end of the bracket) from the outside of the wind blade.

    5. Tighten all the bolts of blades and brackets, and toggle the blades. It should not have abnormal noise or jamming. Tighten the nut (under the upper cover plate of the wind turbine) to make the upper cover plate tightly fixed.

    6. Align the flange hole of the wind turbine with the flange hole on the tower pole, put on flat washers and spring washers, and tighten the nut.

    7. Professional installation is highly recommended if you have no previous installation experience.

    8. You can watch the attached installation video as a reference.

  • Customer Reviews
    No comments