Aluminum Solar Panel Mounting Rail Bracket with Trapezoidal Clamp for Module Fastening,(Gold)
The integrated trapezoidal clamp design ensures a secure and reliable fastening solution for solar modules on various roof types.
Engineered for easy
-
Detail
*Application: T20 short rail for trapezoidal sheet PV mounting. on trapezoidal sheet metal roofs with sheet metal outer skin.
*Material T20 profiles: aluminum alloy AL6005-T5, 1.00 KN
*Requirement - trapezoidal sheet minimum sheet thickness steel 0.5mm / aluminum 1.00mm.
*Good static load distribution. This type of installation reduces the suction effect on the outer skin of the roof covering by the weight of the PV .
*No transport of long profile bars - adjusted to the bead spacing of the profile sheets.
*The profile sections are pre-punched and covered with sealing tape.
Assembly
1. Roof division depending on module dimensions
2. for Align the first row using a chalk line.
3. Place the T20 holder in position, pre-drill with a Ø 5.00 mm sheet metal drill and with 4 blind rivets. Alternatively: with thin sheet metal screws without pre-drilling.
4. Place the next rows using a wooden template. After 10 rows check the direction again with a piece of string.
Details:
*Material: Aluminum alloy
*Color:silver
Style: 2x rails + 2x middle clamp, 4x rails + 4x end clips
Rail Size: 200mm
Middle clip: for solar panel 30mm, for solar panel 35mm
End clip: for solar panel 30mm, for solar panel 35mm
Note:Middle clips and end clips purchase the corresponding size set according to the thickness of your solar panel
Package Contents:
2x Rails(with accessories Gasket+Screw)+ 2x middle clamp
Or
4x Rails (with accessories Gasket+Screw)+ 4x end clamps
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
========== -
Customer ReviewsNo comments