FTVOGUE 48V Wind Solar Hybrid Controller 1000W Wind Turbine 2400W Solar MPPT Charge Controller with Bluetooth for Home Boat Street Light Off Grid Systems

Specification:
Item Type: Wind Solar Hybrid Controller
Material: Aluminum Shell, Steel
Controller Size: Approx. 26x16x9.5cm / 10.24x6.3x3.74in
Rated System Voltage: 48V
Rated Wind Power: 1000W
Rated Solar PV Power: 2400W
Maximum Wind Turbine Access Voltage: Wind Turbine ≤130V
Maximum PV Access Voltage: PV ≤130V
Controller Power Mode: Battery or PV Panel
Load: Multiple Working Modes Optional: Pure Light Control Mode, Constant Open Mode Light Control + Time Control Mode (Four Time Periods + Morning Light)
Display Parameters: Voltage, Battery Capacity, Current, Power, Load Mode, Temperature, etc.
Protecting Type: Solar Cell Anti Reverse Charging Protecting, Battery Open Circuit Protecting, Battery Reverse Connection Protecting, Overcurrent and Overvoltage Soft Automatic Brake Protecting, Overload Protecting, etc.
Heat Dissipation Method: Air Cooling, Self Cooling
Operating Temperature Range: -20℃-55℃
Weight: Approx. 4311.00g / 152.07oz

How to Use:
Parameter Setting Operation Instructions:
1. Long press the ENTER key for more than 3 seconds on any browsing interface to enter the parameter setting interface.
2. Press the ENTER key to enter the next parameter setting item; Press the ESC key to enter the previous parameter setting item.
3. When parameter flashing needs to be set: Press the UP key to increase the value, long press for fast increase; Press the DOWN key to decrease the value, long press for fast decrease.
4. After setting the parameters, long press the ENTER key for more than 3 seconds to save the parameters and exit the setting state.
5. After setting the parameters, long press the ESC key for more than 3 seconds to not save the parameters and exit the setting state.

Package List:
1 x Wind Solar Hybrid Controller
1 x Resistor
2 x Connecting Wire
1 x Instruction Manual
2 x Screw
2 x Nut

Note:
Lithium cell cannot be