Vertical Axis Wind Turbine Generator, 100W Wind Power Turbine Generator Kit Wind Turbines with 4 Fan Blades for Home and Gazebos 20.87 x 20.87 x 29.53 Inch (24, Volts)

Specifications

Color: White

Material: Nylon Fiber, Aluminum, Copper, Stainless Steel

Process: Plastic Spraying

Generator Type: Copper Wire Permanent Magnet Levitation Generator

Braking Type: Electro-mechanical Brake

Controller IP Protection Level: IP67

Power Source: Wind Powered

Fan Blades: 4

Maximum Power: 100W

Wheel Diameter: 53cm/20.87in

Rated Wind Speed: 13m/s/29.08mph

Safe Wind Speed: 35m/s/78.29mph

Start-up Wind Speed: 2.5m/s/5.59mph

Working Temperature: -40-80℃/-40-176℉

Noise: 30dB

Flange: DN20

Flange Outer Diameter: 10.5cm/4.13in

Flange Inner Diameter: 7.5cm/2.95in

Flange Hole Quantity: 4

Flange Hole Diameter: 1.4cm/0.55in

Rod Connection Diameter: 5.6-6.2cm/2.2-2.44in

Assembly Required: Yes

Product Size(D*H): 53*75cm/20.87*29.53in

Package Size: 86*38*20cm/33.86*14.96*7.87in

Gross Weight: 12kg/26.46lbs

Net Weight: 10.5kg/23.15lbs

Package Included

1* Vertical Wind Turbine Generator

1* Controller

Other Needed Accessories

Notes

1. Please check the size carefully before ordering.

2. Please be sure to use it with a gel battery or a lead-acid battery. The lithium batteries are not suitable for the product.

3. The mounting height depends on the installation environment. Please make sure that there is no obstruction around to ensure that the product receives wind energy in 360°.

4. Please connect the three green wires of the controller to the three wires of the fan (without distinguishing the poles), and please connect the red and black wires to the positive and negative poles of the battery respectively.

5. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

6. Please note that the correct wiring sequence for the product should be: wind turbine - wind turbine controller - battery - inverter - load.