1400W Solar Grid Tie Micro Inverter, 110V Waterproof IP65 Pure Sine Wave Inverter with 32 bit DSP and LCD Display for 30V 36V Solar Panel

The inverter has six protection functions: over-temperature protection, under-voltage alarm, under-voltage protection, over-voltage protection, short circuit protection, overload protection, etc. Besides, the IP65 waterproof design can prevent rain from eroding its surface, so you can use it with confidence.

The product adopts a self-cooling system and is designed with heat dissipation holes, which can timely reduce the temperature during operation, reduce potential safety hazards and extend the applicable life of the product.

ColorSilverMaterialAluminium AlloyAC Output Power1000WMaximum AC Output Power1050WAC Output Voltage110V(AC 90V-140V)DC Input22-50VDCFrequency Range48- 62Hz(Self-adaption)MPPT Range26-38VScope of Application36V Solar Panel and 36V BatteryPackage Size35*20*10cm/13.8*7.9*3.9inProduct Size21*16.5*5.3cm/10.6*6.5*2.1inGross Weight4kg/8.8lbsNet Weight3.5kg/7.7lbs

• Step 1: Install the inverter on the support of the photovoltaic panel with the screws provided by the machine.
• Step 2: Connect the positive and negative poles of the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter.
• Step 3: Open the waterproof cover of the AC output interface of the inverter and connect the AC cable to the AC waterproof plug.
• Step 4: Connect the AC output cable to the AC main cable.
• Step 5: Repeat steps 1 to 3 to install and connect all inverters.
• Step 6: Connect the AC main cable to the public grid and start your green energy journey.

Notes

• 1.Please install the inverter correctly according to the instructions. If you have any questions, please contact the relevant personnel.
• 2.Please don’t dismantle the machine. Only qualified maintenance personnel can repair the inverter.
• 3.Please install the inverter in a place with low humidity and good ventilation to avoid overheating the inverter and remove the surrounding inflammable and explosives.
• 4.When using this inverter, please take good care of your children to prevent them from touching and playing to avoid electric shock.
• 5.Please note that connected solar panels, batteries, or wind generators DC input DC power supply cable.
• 6.Please note that this inverter does not have a monitoring function.
• 7. Please note that our products are grid-connected, the AC output port has to be connected to the home grid in order to achieve grid-connected power generation.
• 8.When the input load is with solar panels, it is important that the VOC voltage is between 30-48V. We recommend that the solar panel is configured for 20% more power than the power of the product. For example, if the product is 600W, the total power of the solar panels should be between 700-750W. If the product is 1200W, the total power of the solar panels should be between 1200-1400W.
• 9.When the input load is a battery, we recommend a battery voltage of 36V, which can be connected in series with 3 12V batteries. Please note that the positive and negative polarity should not be reversed when connecting the product. The recommended battery current is 36V/10mah for 300W, 36V/20mah for 600W, and 36V/40-45mah for 1200W.
• 10.The input and output voltage of the configuration is within the normal operating voltage range of the product in order for the product to work properly and achieve grid-connected power generation.
• 11.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.

Key Features

Six Protection Guard

Good Heat Dissipation Effect

Specifications

How to Install