Solar Controller, 40A 60A 100A Wind Solar Hybrid Char Controller Dual USB Wind-Solar System MPPT Regulator(60A)

Notice:
Regarding wind and solar input power, strictly follow the recommendations below.
1.The maximum wind input is 200W.
2.Maximum input power of solar panel:
40A=400W
60A=600W
100A=700W
SYSTEM CONNECTION:
1. Connect the positive electrode of the battery to the controller as shown in the figure, and the controller will automatically detect the battery volta.
2. Connect the positive and negative poles of the load to the controller as shown in the figure, and be careful not to reverse them.
3. Connect the solar panel to the controller as shown in the figure.
4. Connect the wind nerator to the controller as shown in the figure.
5. Rise Charging function, Or for power output,short circuit is strictly prohibited at any time!
Charging connection mode:
Wind input 15V-50V, solar panel 18~90V input, char the battery12V, 24V, 36V, 48V, 60V, the output load corresponds to the battery volta value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the volta value corresponding to the recharable battery, set the relevant charging parameters, with memory function.
Dual battery charging connection mode:
Wind input 15V-50V, solar panel 18V input, charbattery 12V,battery 24V, 36V, 48V, 60V battery; solar panel 36 volt inputbattery 24Vbattery 36V, 48V, 60V battery char. The output load corresponds to the battery volta value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the corresponding volta value of the recharable batterybattery,battery, set the relevant charging parameters, with memory function.
Boost charging connection mode:
Wind input 15V-50V, solar panel 18V input,not connected to the battery, connected to the negative poleBattery 24V, 36V, 48V, 60V battery charging; solar panel 18V--36V inputnot connected to the battery, connected to the negative poleBattery 24V ( PV18V), 36V, 48V, 60V (PV36V) battery charging. The output load corresponds to the battery volta value. Connect the battery first, then the solar panel or wind motor, and finally the load. Connect the battery, first set the volta value corresponding to the chargingbattery, set the relevant charging parameters, with memory function.
No battery working mode:
Wind input 15V-50V, solar panel 18V input,Do not connect the battery., connect to the negative poleLoad 24V, 36V, 48V, 60V drive work. The boost output volta value is consistent with the load volta value, and the load is finally connected. Connect the wind or hydraulic motor or solar panel with 18 volt solar panel, first set the volta value corresponding to the load, set the relevant charging parameters, with memory function.
Self-Consume
<;10mA
USB Output
5V/2A Max
Operating Temperature
-10-+60
Siez/Weight
268*138*66mm/650g