Wind Solar Hybrid Charge Controller 6000W-14000W,Wind Solar Hybrid Charge Controller Photovoltaic and Battery Dual Power Supply,Boost MPPT Generator 48V
-
Detail
Hey,are you still worrieds about the low efficiency of your solar energy system?
Is your photovoltaic equipment unable to unleash its full potential due to the limitations of traditional controllers?
Come on and check this powerful Wind Solar Hybrid Charge Controller! It will completely change your energy management experience!
▶▶This type of wind solar hybrid street light controller is a special design for small off-grid devices, where wind generators and solar panels charge batteries safely and efficiently.
▶▶MPPT boost charging function of the wind generator.
▶Specification:
●Systems rated voltage: 12V/24V/48V
●Size:6.57""*5.73""2.43""/167*145.5*61.8mm
●Working temperature and humidity range: - 20~+55℃/35~85% RH (no condensation)
☆The above three parameters must meet the conditions:
●(Wind power rating + photovoltaic rating) / Systems voltage ≤ 40A.
●Wind power rating/systems rating voltage ≤25A
●Photovoltaic rating/systems rating ≤25A
●No-load current (DC): ≤0.05A
●Controller power supply mode: battery or photovoltaic panel
Packing list:
1 x wind-solar hybrid controller
1 x external discharge resistor
2 x connecting wires
1 x Instruction manual
●Note:
1. Correct connection sequence:
1) pls connect the wires between battery and controller
2) pls connect the wires between wind/solar panels and controller
2. Usable battery:
●This model is used for GEL ,lead-acid and lithium battery.
✉ If you have any problems or questions, please do not hesitate to contact me. We will reply within 24 hours. -
Customer ReviewsNo comments